Your floors need special protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring is sensible and saves money. A spill of paint, the drop of an hammer, a scratch from heavy furniture cost 1000s of dollars in replacement and repair costs. This post describes surface protection products for floors so that you can make informed alternatives on the most effective product to use for your requirements. Varieties of Protection Packaging:
Floor protection products are commonly packaged as either:
(1) Products from the roll: Such as common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased with the roll are generally measured in thickness by mils (e.g., 2.5 mils thick approximately 48 mils thick).
(2) Products through the sheet: Included in this are corrugated plastic, masonite, and other rigid protection. Protective materials purchased with the sheet are commonly measured in thickness through the inch (e.g., 1/4-inch thick) and normally be 4 feet by 8 feet.
Paper protection is acceptable for all hard surfaces and resilient surfaces but does not work well to shield carpets as it can certainly tear when flexing under footsteps. Paper items are breathable in order that glue fumes and cement curing vapors can escape. One challenge with paper products while they require tapes to secure the crooks to flooring and tapes could leave adhesive residue when removed. Common paper protection products include:
Polyethylene (PE) films can be bought as self adhesive rolled films varying from 2.0 up to 3.5 mils in depth. They trap any moisture from escaping so they really shouldn’t be suited for any floors that are curing. Two of the amazing features of polyethylene films are that films will flex and contour so they can provide on carpets in addition to hard surfaces. These films do not offer any impact protection and therefore are normally rated for short term usage of 30 to Three months only. Polyethylene films are prepared for one-time use and do not use recycled materials driving them to a poor choice in sustainable protection. Protection films can be purchased in a number of adhesion "tack". Hard surface protection films may lower tack and color than carpet protection which requires a more aggressive glue to hold onto carpet fibers successfully.
Plywood and Masonite are commonly utilized as protection on commercial projects with plenty of visitors. Masonite is a wood product made from wood fibers unlike plywood that is an authentic sheet of thin wood. Both plywood and Masonite are sold inside the standard size of 4 feet by 8 feet and so are more expensive per sq . ft . than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is frequently 1/4 inch to 3/4 inch thick. Both products provide impact protection on the number of floor types and supply adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable but you are bulky to hold and store. These wood sheets must be used on top of a softer protection like a rolled textile since they easily scratch flooring. These sheets work nicely to protect carpet while they prevent wrinkles when rolling heavy loads within the carpet. Plywood and Masonite tend not to offer moisture protection and could be harder to chop to size than other protection types.
Textile goods are commonly constructed from recycled cloth. Moreover, these rolled protection products often have advantages including skid resistant backings or breathable plastic liners. For wood flooring, these specialty textile rolls are recommended as they are breathable, skid resistant, reusable, often leakproof and easy to slice to size.
For more info about
floor protector take a look at our new web portal